B100XP concrete pump - Technical data
B100 xp equipped with an Alko twin axle with overrun device
 |
The Diesel engineThe hydraulic power pack is equipped with the powerful new and ecological Lombardini CHD 2204 engine with low fuel consumption. |
Technical data
| B100 xp | ||
| Hydraulic power pack | ||
|---|---|---|
| Diesel Lombardini CHD 2204 engine | 37 kW - 50 HP | |
| Hydraulic output | 114 l/min - 30 gal/min | |
| Maximum hydraulic pressure | 150 bar - 2175 psi | |
| Air compressor (optional) | 400 l/min - 105 gal/min | |
| Screw pump | ||
| Maximum theoretical output * | 250 l/min - 66 gal/min | |
| Maximum theoretical pressure * | 12 bar - 174 psi | |
| Maximum grain size *** | 25 mm - 1 inch | |
| Horizontal pumping distance ** | 60 m - 200 ft | |
| Vertical pumping distance ** | 20 m - 65 ft | |
| Additive screw pump (optional) | ||
| Theoretical variable output | 0-10 l/min - 2.64 gal/min | |
| Maximum theoretical pressure | 28 bar - 406 psi | |
| Concrete mixer capacity | 350 l - 12 cubic feet | |
| Total weight B100xp | 2600 kg - 5732 lbs |
* With 2L8 stator and rotor - pressure: 25 bar (362 psi), horizontal distance : 60 m (200 ft), vertical distance : 30 m (100 ft), max grain size : 16 mm(0.62 inch), theoretical output : 170 l/min (44 gal/min)
** Depends on material, consistency and hose diameter. Both distances cannot be reached simultaneously. Consistency class: S4 (fluid). Slump range: 16 to 20 cm(6,3 to 7,9 inches)
*** Only under special circumstances. Contact technical department.
